Brown and Sharpe 542, $20.00
Square.
Federal B2I, $25.00
Dial indicator, 0.050" range by 0.0001", 1 1/2" face. Rounded tip.
Federal E21, $75.00
Dial indicator, 0.0001"/div. Three inch diameter face marked reads +5 to 0 to -5 thousandths/rev. Full travel about 0.031". Round tip.
Federal E3BS-R1, $125.00
Dial indicator, 0.0001"/div. Three inch diameter face reads 0 to .020"/rev. on main dial and 0 to 19 on secondary dial. Full travel is about 0.400". Round tip.
Federal P31, $25.00
Dial indicator.
Federal PMP-31111, $400.00
Surface profiler head with an assortment of 12 styli in a protective case. Color coded styli include: Orange/Orange, Orange/Red (2), Black/Red, White/Red, Green/Red, Brown/Orange, Grey/Brown, Yellow/Red, Brown/Red, Blue/Red, Olive(green)/Red.
Micro Gage, Micro-dial Indicator, $50.00
Dial indicator, 3" face marked ±100, 1" total travel, 0.001"/division, with clamp stand.
Mitutoyo 123-101, $50.00
Disc micrometer, 25 mm, 0.01 mm resolution.
Mitutoyo 1410, $25.00
Dial indicator, 0.250" range by 0.001", 1 3/8" face. Pointed tip.
Mitutoyo 148-112, $20.00, 3 Available
MHS-1-.5" micrometer head. 0.500" x 0.001", mounting area 0.375" diameter x 0.375" long. In box with wrench and calibration certificate.
Mitutoyo 515-319, $900.00
E-Type height master. Range 0.5" to 12" with 0.0001" resolution. Block pitch accuracy, parallelism of block, and micrometer head accuracy are all ±0.0001". Excellent condition.
Pacific Transducer Corp. PTI 306L $200.00
Type A durometer with calibration standard in protective case. Conforms to ASTM 2240-85.
Pacific Transducer Corp. PTI 307 $150.00
Type D durometer with calibration standard in protective case with operating instructions. Conforms to ASTM D 1706-61 & ASTM 2240-64T.
Pacific Transducer Corp. PTI 307L $200.00
Type D durometer with calibration standard in protective case. Conforms to ASTM 2240-75.
Precision Gage and Tool Co. PD-250, $250.00
Fineness of grind gage, 0 to 250 um. In wooden case.
Starrett 25-631, $30.00
Dial indicator, 1" range x 0.0005", rounded tips.
Starrett 656-617, $55.00
Dial indicator, 0.400" range by 0.0001", 3 1/2" face.
Unknown Manufacturer & Part No., $300.00 Additional Photo: Right Angle Adapter
Probe set for CMM. Seven pieces (including the one in the right angle holder). Balls are 1/4", 3/8", and 1/2" diameter. O.A.L ranges from about 5.6 to 6.1". Tapered length is about 2.54" long, diameter at smallest taper is 0.575", diameter at largest laper is 0.700". The piece in the right angle holder accept staight shanks about 0.37" diameter.
Unknown Manufacturer & Part No., $150.00
Granite parallels, 1 x 2 x 12". Matched set in protective case.
Unknown Manufacturer & Part No., $20.00
Micrometer extensions. Length is 150mm. You get two of each piece shown in the photo. One set is marked with a property ID number and "Inspection", the other set is unmarked.
| TOP |
Carboloy DTGA 434F, $10.00
Carbide inserts, GR - 883, 0.54" x 0.94" x 0.187" thick, box of 10.
Carboloy SPMG-323E, $10.00
Carbide inserts, sides: 0.38" x 0.127 thick, pkg. of 10.
CJT/Durapoint 110, $10.00, 2 Available
Carbide tipped drill bit. 3/4" diameter, 5 1/4" OAL. Unused.
CJT/Durapoint 150, $10.00
Carbide tipped drill bit. 3/4" diameter, 8 1/4" OAL. Unused.
Fansteel RSN-43, $10.00, 2 Available
Carbide inserts, 0.47" dia. x 0.19" thick, box of 10.
Fansteel SEC634, $10.00
Carbide inserts, 0.75" x 0.75" x 0.187" thick, box of 10.
Fansteel SNMP-643E, $15.00, 2 Available
Carbide inserts, 0.76" x 0.76" x 0.25" thick, box of 10.
ISCAR GTR-3, $10.00
Carbide insert, 0.537 long x 0.122" thick, package of 10.
Kennemetal K1CR 150SP 4055C, $10.00
Carbide insert tool holder.
Kennemetal KSSR 2.5 TP3-0, $35.00
Carbide insert tool holder, unused.
Metcut 283-1375, $12.00
Carbide inserts, sides 0.438", 0.17" thick, pkg. of 10.
Small Parts, Inc. HST-172, $15.00/Lot of 3
High speed tap - plug style, Size #1-72 NF, lot of 3 unused taps.
Sossner 17100, $28.00, 4 Available
0-80 tap, pkg. of 12 unused.
Sossner 20001, $28.00
0-80 tap, pkg. of 12 unused.
Sossner 17103, $22.00, 1 Available
2-56 tap, pkg. of 12, unused.
Sossner 20011, $22.00, 1 Available
2-56 tap, pkg. of 12 unused.
Sumitomo ITSN433, $10.00
Carbide inserts, sides 0.783" x 0.187" thick, box of 10.
Unknown Maker and Model, $5.00
Carbide inserts, diamond shaped, 0.72" x 1.27" x 0.192" thick, box of 5.
Unknown Maker and Model, $10.00
Carbide inserts holders and screws, quantity as shown.
Unknown Maker and Model, $10.00
Carbide inserts, spiral shaped, 0.33" x 1.33" x 0.155" thick, 10 pieces.
Unknown Maker and Model, $15.00
Carbide inserts, triangle shaped, 2 sizes, 0.55" x 0.129" thick (5 pieces) and 0.31" x 0.097" thick (10 pieces).
Unknown Maker and Model, $10.00
Carbide inserts, triangle shaped, 0.63" x 0.125" thick, 9 pieces.
Valenite VHM-202, $80.00
Carbide insert tool holder with 3 boxes of carbide inserts, Modco Tools No: 2020010-27, 5 inserts per box. The shaft 1.250" dia. x 2.37". OAL is 4.82" (without inserts) and the body diameter is 1.912".
Waukesha 8700-0012F, $12.00
Carbide Inserts, C-2 grade, size 2, 0.66" x 0.67" x 0.187 thick, box of 10.
Waukesha Walter WCT 6200 0006-F, $35.00, 6 Available
Carbide insert tool holder, unused.
Waukesha Walter WCT 6202 0006-F, $35.00, 2 Available
Carbide insert tool holder, unused.
Waukesha Walter WCT 6202 0010-F, $35.00, 2 Available
Carbide insert tool holder, unused.
Waukesha Walter WCT 6202 0012-F, $35.00, 2 Available
Carbide insert tool holder, unused.
Waukesha Walter WCT 6206 0004-F, $35.00
Carbide insert tool holder, unused.
| TOP |
3M 3831, $140.00
Modular connector system assembly tool. For use with 0.100" center socket such as 3M SHG-10xx-001010-BBA connectors with from 3 to 15 contacts using 22 to 28 AWG wire. Includes model 3686-12 pistol grip, 3634-10 assembly head, and instruction sheet.
AMP 244271-1, $90.00
Crimp tool.
Astro Tool M22520-5-01, $100.00
Crimp tool.
Buchanan 11545, $45.00
Crimp tool.
Buchanan 11707-1, $45.00
Crimp tool.
Daniels HX-3, $120.00, 2 Available
Crimp Tool. Daniels part no: 22520/10-01 with X577 die set.
Daniels HX-4, $145.00
M22520/5-01 crimp tool with Y204P die set for coax connectors, pins for locking die set in place, and a copy of the instruction sheet.
Daniels HX-4, $190.00, NEW
M22520/5-01 crimp tool with Y209 die set for coax connectors, pins for locking die set in place, and instruction sheet. New in box.
Daniels MH780, $105.00
MS3198-1 crimp tool with M22520/2-02 positioner. For use with 20 - 26 AWG wire and MS3192-20, MS3193-20, MS24254-20P, MS24255-20S, MS18134-20, MS18136-20, M39029/4-20-20, M39029/5-20-20, M39029/9-20-20, M39029/10-20-20, M83723/33-20, and M83723/34-20 contacts.
Daniels WA-22, $225.00
Pneumatic crimping tool with M22520/2-02 positioner (Daniels K13-1). For use with 20 - 24 AWG wire and MS24380/10-1, MS24380/11-1, MS24380/16/17-1 through -5, M39029/11-20-20, and M39029/12-20-20 contacts.
Kings Electronics KTH-1000, $120.00
Model KTH-1000 crimp tool with removable KTH-2024 die set.
Thomas & Betts WT145C, $130.00
Shure Stake hand crimp tool. 2 openings or "nests" for 10-12 and 14-16 ga. T&B RA, RB, RTC, RAA, RBB, RCC, and RBC series Nylon and Vinyl insulated terminals, splices, and disconnects.
Thomas & Betts WT238, $50.00
Crimp tool. With die set for 0.101, 0.128, 0.149, and 0.156 hex crimps.
Thomas & Betts WT-440, $140.00
T&B Crimp tool in wooden case with die set.
Utica/Bonney CHA-5, $30.00, 2 Available.
Set for 8 in/oz +/- 0.5 in/oz. Both have property and calibration tags but they don't look like they were ever put into service.
| TOP |
HeliCoil Products Threaded Inserts and Installation Tools
| HeliCoil Twinsert Mandrels, Unused, In Box | |||
| Part No. | Size | Quantity | Price / ea. |
| 8553-03 | |||
| 8553-04 | |||
| 8553-06 | |||
| 8554-03 | |||
| HeliCoil Twinsert Prewinder Hand Installation Tools with One Mandrel, Unused, In Box - Photo | |||
| Part No. | Size | Quantity | |
| 2552-7M | |||
| 2698-04 | 4-40 | ||
| 2698-2 | |||
| 2698-3 | |||
| 2698-4 | |||
| 2698-5 | |||
| 2698-6 | |||
| 2705-3 | |||
| 2705-3 USED | |||
| 2705-4 | |||
| 2705-5 | |||
| 2705-5 USED | |||
| 2705-6 |
|
||
| 2705-6 USED | |||
| HeliCoil Threaded Inserts, Stainless Steel, Price Per 100 Pieces - Except as noted | ||||||
| Thread | Insert Type | Quantity |
Price/100 | Bin | ||
| 4 - 40 UNC | Screw Lock | 5100 |
15.00 |
24, 52 |
||
| 6 - 32 UNC | Screw Lock | 600 |
15.00 |
10 |
||
| 6 - 32 UNC | Free Running | 1400 |
15.00 |
13 |
||
| 6 - 32 UNC | Screw Lock | 2600 |
15.00 |
54 |
||
| 8 - 32 UNC | Free Running | 0 |
SOLD |
4 |
||
| 8 - 32 UNC | Free Running | 4400 |
15.00 |
6 |
||
| 8 - 32 UNC | Screw Lock | 91 |
13.00/91 |
12 |
||
| 8 - 32 UNC | Free Running | 700 |
15.00 |
56 |
||
| 10 - 24 UNC | Free Running | 3100 |
15.00 |
7 |
||
| 10 - 24 UNC | Free Running | 900 |
15.00 |
55 |
||
| 10 - 32 UNF | Screw Lock | 63 |
9.00/63 |
25 |
||
| 10 - 32 UNF | Screw Lock | 3000 |
15.00 |
3 |
||
| 10 - 32 UNF | Free Running | 1200 |
15.00 |
8 |
||
| 10 - 32 UNF | Free Running | 200 |
15.00 |
33 |
||
| 1/4 - 20 UNC | Free Running | 2200 |
15.00 |
2 |
||
| 1/4 - 20 UNC | Screw Lock | 900 |
15.00 |
15 |
||
| 1/4 - 20 UNC | Free Running | 400-HOLD |
15.00 |
27 |
||
| 1/4 - 28 UNF | Screw Lock | 900 |
20.00 |
16 |
||
| 1/4 - 28 UNF | Screw Lock | 10 |
2.00/10 |
51 |
||
| 5/16 - 20 UNC | Free Running | 100 |
20.00 |
31 |
||
| 5/16 - 20 UNC | Free Running | 420 |
20.00 |
23 |
||
| 5/16 - 24 UNF | Free Running | 32 |
6.00/32 |
9 |
||
| 5/16 - 24 UNF | Free Running | 50 |
10.00 |
34 |
||
| 5/16 - 24 UNF | Screw Lock | 1100 |
20.00 |
5 |
||
| 3/8 - 16 UNC | Free Running | 200 |
20.00 |
35 | ||
| 3/8 - 24 UNF | Screw Lock | 200 |
20.00 |
18 |
||
| 3/8 - 24 UNF | Free Running | 68 |
13.00/68 |
22 |
||
| 3/8 - 24 UNF | Free Running | 315 |
20.00 |
21 |
||
| 3/8 - 24 UNF | Screw Lock | 38 |
7.00/37 |
19 |
||
| 3/8 - 24 UNF | Screw Lock | 200 |
20.00 |
20 |
||
| 7/16 - 14 UNC | Free Running | 159 |
20.00 |
36 |
||
| 7/16 - 14 UNC | Free Running | 10 |
2.00/10 |
50 |
||
| 7/16 - 20 UNF | Free Running | 27 |
5.00/27 |
37 |
||
| 7/16 - 20 UNF | Free Running | 45 |
9.00/45 |
40 |
||
| 7/16 - 20 UNF | Free Running | 110 |
20.00 |
42 |
||
| 7/16 - 20 UNF | Free Running | 1 |
59 |
|||
| 7/16 - 20 UNF | Free Running | 37 |
7.00/37 |
39 |
||
| 1/2 - 13 UNC | Free Running | 3 |
30 |
|||
| 1/2 - 20 UNF | Free Running | 289 |
20.00 |
29 |
||
| 1/2 - 20 UNF | Free Running | 195 |
20.00 |
38 |
||
| 1/2 - 20 UNF | Free Running | 59 |
11.00/59 |
43 |
||
| 1/2 - 20 UNF | Free Running | 77 |
15.00/77 |
44 |
||
| 1/2 - 20 UNF | Free Running | 42 |
12.00/47 |
45 |
||
| 5/8 - 18 UNF | Free Running | 16 |
8.00/16 |
57 |
||
| 5/8 - 18 UNF | Free Running | 107 |
10.00/20 |
58 |
||
| 3/4 - 16 UNF | Screw Lock | 22 |
20.00/22 |
28 |
||
| 3/4 - 16 UNF | Free Running | 4 |
4.00/4 |
47 |
||
| 3/4 - 16 UNF | Free Running | 18 |
18.00/18 |
48 |
||
| 3/4 - 16 UNF | Free Running | 2 |
2.00/2 |
49 |
||
| 1 1/8 - 12 | Free Running | 22 |
2.00 EA. |
53 |
||
HeliCoil Air Installation Tools $75.00
One lot of air tools for HeliCoil inserts. Lot includes: 4-40 (4), 6-32 (2), 8-32 (2), 10-32 (3), 1/4-28 (2), 5/16-18 (1), 5/16-24 (2), 3/8-24 (2), 7/16-20 (1), 1/2-20 (2), all with mandrels, plus other parts including spacers, pins, and mandrels. Most tools are used but a couple appear to be new. Photos are representative. Not all tools have spacers or the same drive configuration as those shown in the photos.
| TOP |
3M 497, $160.00
Electronics vacuum. ESD safe. With brushes, 3 nozzles, 3' hose (expands to about 6') and spare filter (unused). Requires 115 VAC, 60 Hz, 6 A. Additional spare filters are available as Atrix International Corp. Model # 31600.
AB TECH TD90S1-10, $30.00, 9 Available
Diamond drill bit. 2 1/2 in. in diameter with pilot bit and 3/8" diameter shank, unused.
Albrecht 65-J1, $125.00
Keyless drill chuck with bearing on 5/8" Jacobs arbor. Capacity 0-6.5mm. O.A.L. including shaft: 5.12". Operates smoothly.
Albrecht 65-J1, $125.00
Keyless drill chuck on 5/8" Jacobs arbor. Capacity 0-6.5mm. O.A.L. including shaft: 5.12". Operates smoothly.
Amplex W506N8, $55.00, 9 Available
Diamond slurry for finish lapping, Grade 1/4, concentration 25 CT, 250 ml unopened bottles.
Boeckeler 1-885-1, $150.00
Boeckeler Instrument Co. Microcode Digital Micrometer Readout. 5 Digit. Use with Boeckeler digital micrometers (not included). This readout is not scaled properly to readout using the Boeckeler 1398 micrometer listed above. One revolution of the 1398 equals 0.025" but the readout says 1.0000"
Builders Brass Works, Inc., BW-801, $1.75 / Set, 375 plus Sets Available
Cabinet Latch, solid brass with black finish, spring loaded, adjustable tension on steel balls. Front or side entry.
Campbell Hausfield MP514800, $12.00, 3 Available
Campbell Hausfield regulator or equivilent Norgren regulator, with 0-160 PSI gage, coiled hose (about 6), and Coilhose safety blow gun. Fittings are 1/4" NPTF.
Carr-Lane PO1820-0.500, $3.00, 2 Available
Drill Bushing, 0.500" I.D. x 0.750" O.D. x 1.25, New.
Deltronic PPM25, $100.00, Lot of 4 sets
Four Deltronic gage pin sets, 25 pins per set, 0.0025" steps. Includes: PPM25 .7250 (0.6950-0.7550), PPM25 1.0000 (0.9700-1.0300), PPM25 1.1000 (1.0700-1.1300), and PPM25 1.2650 (1.2350-1.2950) sets.
EREM RotoPic 2000, $20.00
Vacuum pick-up tool for small parts. Tip rotates for easy positioning. Length 7.25".
Fusion 1115S, $150.00
Brazing alloy powder. Cadmium Free Silver Brazing Filler Metal. AWS A5.8-92 BAg18. Alloy composition: Ag=60%, Cu=30%, Sn=10%. Liquidus Temperature: 718ºC (1325ºF). Approximately 50 oz.
Greenfield 1-16, $20.00
Steel number stamping set 1/16" height. A-Z plus "&".
Hoggson Pettis 1-4, $20.00
Steel number stamping set 1/4" height. A-Z plus "&".
Hakko 493-10, $40.00, 32 Available
Hakko 493 ESD Safe Fume Extractor / Smoke Absorber, 115 VAC, 17 W, 60 Hz, with 1 new filter (not shown). Used.
Kester, SN63PB37, $4.00
Solder, 63% Tin, 37% Lead, 0.015" Diameter, # 282 Flux, 1 Pound Roll.
Mipox STEY, $15.00
Lapping film, 3 micron on 50 micron mylar base. 100 meters long x 1" wide.
Mipox STEZ, $15.00
Lapping film, 12 micron on 38 micron mylar base. 100 meters long x 1" wide.
Miniature Precision Bearing, $6.00, 60 pr. Available.
Seal ball bearings. ID 0.500", OD 0.750". Sold as matched pairs. Unused.
Mitutoyo, $100.00
Mitutoyo Coating Thickness Gage.
Moyco Industries Ultralap WCA 010, 15.00, 3 Available
Lapping Film, 1.0 micron, Aluminum Oxide (Al2O3), 1" wide roll is about 4.7" diameter with a 1.25" core. Stable Mylar tape is 0.002" thick. 600' plus.
Moyco Industries Ultralap WCA 050, 15.00, 4 Available
Lapping Film, 5.0 micron, Aluminum Oxide (Al2O3), 1" wide roll is about 4.7" diameter with a 1.25" core. Stable Mylar tape is 0.002" thick. 600' plus.
Moyco Industries Ultralap WCA 120, 15.00, 3 Available
Lapping Film, 12.0 micron, Aluminum Oxide (Al2O3), 1" wide roll is about 4.7" diameter with a 1.25" core. Stable Mylar tape is 0.002" thick. 600' plus.
OK Industries SA-9-115, $30.00
Fume absorber, 115 VAC, with filters and instruction, New.
OK Industries SA-9-E-115, $35.00
Fume absorber, anti static, 115 VAC, with filters and instruction, New.
Optical Flats
Click to see Quartz and Zerodur optical flats from 1" to 10" diameter.
Pamran ELM-7K (HD), $20.00
Ceramic element for Pamran heat guns. New, in box with installation instructions.
Raychem AA400, $100.00
Superheater, requires 115 VAC 60Hz and 45-55 psi at 3.3 CFM
Setco, P2, $210.00
Right Angle Fixture, precision ground cast iron, 12" h x 6" w, 6.75" d.
Shofu 0265, $5.00 / Box, 4 Boxes Available
Silicon points for polishing enamels and porcelain. 12/box.
Standard Pneumatic 866, $15.00/Lot
Air tools. Lot of two tools. Operating condition unknown. Sold as-is, no returns on this lot.
Stanley Vidmar, $750.00
Heavy Duty Storage Cabinet, 6 Drawer, 30 w x 28 d x 44.5 h, Drawers 4.75 (1), 5.5 (1), 6.25 (2), 7.87 (2)
Stanley Vidmar, $950.00
Heavy Duty Storage Cabinet, 8 Drawer, 30 w x 28 d x 61.5 h, Drawers 5.5 (7), 7.87 (1)
Stanley Vidmar, $1050.00
Heavy Duty Storage Cabinet, 9 Drawer, 30 w x 28 d x 44.5 h, Drawers: 3.12 (6), 4.87 (1), 5.5 (1), 7.87 (1)
Stanley Vidmar, $1050.00
Heavy Duty Storage Cabinet, 10 Drawer, 30 w x 28 d x 44.5 h, Drawers 3.12 (4), 3.87 (3), 4.75 (3)
Stanley Vidmar, $950.00
Heavy Duty Storage Cabinet, 8 Drawer, 30 w x 28 d x 61.5 h, Drawers: 3.78 (5), 4.75 (1), 14.12 (2)
Stanley Vidmar, $850.00
Heavy Duty Storage Cabinet, 7 Drawer, 30 w x 28 d x 61.5 h, Drawers 3.12 (1), 4.75 (1), 5.5 (2), 7 (1), 14.12 (2)
Stanley Vidmar, $950.00
Heavy Duty Storage Cabinet, 8 Drawer, 30 w x 28 d x 61.5 h, Drawers: 3.78 (4), 14.12 (2), 4.75 (1), 5.5 (1)
Unknown NAS671-6, 1 Lot, $15.00
Thumbscrews, lot of 70.
Unknown, , $6.00 / Set, 6 Sets Available
Quick disconnect fittings.
Unknown, , $8.00 / Set, 8 Sets Available
Quick disconnect fittings.
Weller / Vanier Various Part No.'s, $100.00
Lot of 100+ new soldering iron tips for Weller W100, W100P, EC1000, EC2000, EC3000, & EC4000 soldering irons. Part numbers include: Vanier V2358 (37) and V25-700 (17), Weller CT6C8 (2), EPH103 (15), ETR (18), and PTR(1), and Unknown maker and model (12).
Wesgo Nicuman23, $50.00
GTE Wesgo VPOF Brazing alloys. Alloy composition: Cu=67.5%, Mn=23.5%, Ni=9%. Liquidus Temperature: 955ºC (1751ºF), Solidus Temperature: 925ºC (1697ºF). Diameter: 0.040". Net weight: approximately 36 Troy Oz.
Zero, Model Number Unknown, $50.00
Aluminum instrument case, yellow. Dimensions (inches): Outside (Including feet and handle); 18.25 x 14 x 6, Inside; 17.5 x 12.5 x 5.75 (Subtract about 1.37" from interior height for space used for book holder compartment). Unused, in original, but beat-up box.
| TOP |
Densei Delvo DLV7335-CKE, $140.00
Power screwdriver 3 to 12 kgf / cm torque, no load speed 500 - 700 rpm with fixed power cable. Includes Densei Delvo model DLC1212-HE controller with soft start feature. Rated for cleanroom operation.
Dunmore 16-011, $200.00
High speed sensitive drill, 17,000 RPM no-load speed, 0 - 60 Hz AC or DC power.
Golnex NC-2, $125.00
Electric torque controller for Golnex screwdrivers and nutsetters.
Golnex TC-2, $125.00
Electric torque controller for Golnex screwdrivers and nutsetters. Dual outputs.
Golnex, , $50.00, 2 Available
Power screwdriver, adjustable torque, uses 1/4" hex bits, cable is permanently attached. Cables do not mate with the Golnex NC-2 controller listed on this page.
TECHNART PEDIII, $300.00, 2 Available - Rear View
Torque Controller, part number 4000-SNST11-001, actual torque output depends on screwdriver used (Screwdriver is not included). Requires 100, 110, 115, 220, 230 or 240 VAC, 50/60 Hz.
Testel TS8000, $40.00
Power screwdriver, adjustable torque, uses 6 mm hex bits.
Unknown Model Unknown, $30.00
Power screwdriver.
| TOP |
