PHOTONICS-OPTICAL  :  LASERS  :  OPTICAL BREADBOARD  :  INTERFEROMETER  :  MOTION CONTROL  :  MICROSCOPES & LAMPS  :  LAB & PROCESS CONTROL  :  MICROWAVE-RF  :  TEST EQUIPMENT  :  TOOLS & HARDWARE  :  GLUE  :  COMPUTER  :  VIDEO EQUIPMENT  :  ELECTRONIC COMPONENTS  :  WELDERS & WIRE BONDERS  :  PLC  :  EQUIPMENT WANTED  :  SALES  :  HOME  :  E-MAIL


Lasers and Fiber Optics
Diode Lasers, Drivers, Temperature Controllers, and Mounts
YAG Lasers
CO2 Lasers
Helium-Neon Lasers and Power Supplies
Argon Lasers
Miscellaneous Lasers
Fiber Optics
Contact Information and Sales Terms


DIODE LASERS, DRIVERS, TEMPERATURE CONTROLLERS, and MOUNTS

Anritsu MG0937C, $800.00, 2 Available
Laser diode source plug-in for Anritsu MG9001A or MG9002A stabilized light sources. Wavelength 1.31 +/- 0.02 um. Output level into SM fiber -3 +0.5 dBm -1 dBm. Internal digital modulation 270 Hz, 1 KHz, 2 KHz. External digital modulation at up to 30 MHz. External analog modulation at up to 500 MHz. FC-PC type connector.

B & W Tek, BWC-M5, $2000.00
Five channel laser source. 1310 nm nominal wavelength.

E-Tek Dynamics, Inc. MLDC-1032A, $4500.00, 6 Available
Multi-channel Laser Diode Controller. Independent programmable control and monitoring of laser current, temperature, voltage, and other parameters for 32 laser diodes. Includes 16 MLDC-1002A Dual-channel Laser Diode Driver Modules. Each module has independent limit adjustments for LDC, LDV, and  TEC plus shared adjustment of PD Bias. The MLDC1032A controller has both GPIB and RS-232 interfaces. The system also includes an ETek Dynamics LDTS-TOC-TEC-32 32 channel test fixture with individual UDT PIN 10D1 photo diodes for monitoring each LD. The laser The external monitor PD's are mounted on a temperature controlled aluminum plate. Each of the 32 laser diode test positions has a TEC cooler with thermistor for temp. control of LD's without an internal TEC. Also included: 16 MLDC-1032 controller to LDTS-TOC-TEC-32 test fixture interface cables, on-off key, and an Omega CN76000 auto-tuning temperature controller for the external monitor photodiode cooling plate. The controller and test fixture each require 110V 50/60Hz.

E-Tek Dynamics, Inc. MLDC-1032A, $6,000.00
Multi-channel Laser Diode Controller. Independent programmable control and monitoring of laser current, temperature, voltage, and other parameters for 32 laser diodes. Includes 16 MLDC-1002C Dual-channel Laser Diode Driver Modules. Each module has independent limit adjustments for LDC, LDV, and  TEC plus shared adjustment of PD Bias. The MLDC103A controller has both GPIB and RS-232 interfaces. This system also includes an ETek Dynamics LDTS-TOC-TEC-32 32 channel test fixture with individual UDT PIN 10D1 photo diodes for monitoring each LD. The external monitor PD's are mounted on a temperature controlled aluminum plate. Each of the 32 laser diode test positions has a TEC cooler with thermistor for temp. control of LD's without an internal TEC. Also included: 16 MLDC-1032 controller to LDTS-TOC-TEC-32 test fixture interface cables, on-off key, and an Omega CN76000 auto-tuning temperature controller for the external monitor photodiode cooling plate. The controller and test fixture each require 110V 50/60Hz.

ILX Lightwave FOS-79800D/315C1, $1250.00
ILX FOS79800D WDM DFB Fiber Optic Source Module, 1561.42 nm, 13 dBm, firmware version 6.0.

ILX Lightwave LDM 4980, $450.00
ILX LDM4980 Series Laser Diode Mount.

ILX Lightwave LDX-3220, $1260.00, 5 Available
ILX LDX3220 Precision Current Source. Two output current ranges: 0 - 200 ma and 0 to 500 ma, 4 uA or 10 uA setpoint resolution depending on range, 0.05% setpoint accuracy, long term stability <= 20 ppm, low noise, 0 - 10 V compliance voltage, photo diode feedback, external modulation up to 1 MHz. GP-IB. Includes copy of Users Guide, power key, and power cord.

ILX Lightwave LPA-9072, $1350.00
ILX LPA9072 Laser Diode Parameter Analyzer. 500 mA maximum output current, current setpoint accuracy 4 uA. With bipolar constant current source temperature controller. Has GPIB option. Calibrated 10/17/00, due 10/27/01. Includes "instruction Manual". Rear panel connectors.

Light Control Instruments LCI 320, $400.00, 2 Available
Temperature controller.

Newport 5030, $1500.00
Laser diode driver, Output current range 0 to 3 A, resolution 0.0458 mA, GP-IB and RS-232 interfaces. Includes manual on CD-ROM.

Newport 8000, $2400.00
Modular controller mainframe. Has processor module with GP-IB and RS-232 installed.

Newport 8016, $2400.00
Modular controller mainframe. Has processor module with GP-IB and RS-232 installed.

Newport 8350, $500.00, 2 Available
40 Watt Temperature Controller Module for Newport Model 8000 modular controllers. Operates in constant temperature, constant resistance, or constant TE Current mode. Short-term stability is better than 0.0005C, long-term stability is better than 0.001C. Uses thermistors, AD590 Series, LM335 Series, or 100W Platinum RTD sensors.

Newport 8510, $600.00, 3 Available
Laser diode driver module for Newport 8000 modular controller, 1000mA LDD.

Newport 8530, $700.00
Laser diode driver module for Newport 8000 modular controller, 3000mA LDD.

Newport 8605, $600.00, 2 Available
Combination LDD/TEC Module for 8000 modular controller, 500mA LDD/15W TEC.

Newport 8605-16C, $600.00, 14 Available
Combination LDD/TEC Module for 8016 modular controller, 500mA LDD/15W TEC.

Newport 8610-16C, $700.00, 2 Available
Combination LDD/TEC Module for 8016 modular controller, 1000mA LDD/15W TEC.

Newport 8610-8C, $750.00, 2 Available
Combination Laser Diode Driver and Temperature Controller (LDD / TEC) for the Newport 8008 Modular Controller. Supplies up to 1000 mA of laser diode drive current with a 3 V compliance. Output current accuracy is specified as +/- 0.03% + 30 uA. Noise and ripple total less than 5 uA. The internal function generator can supply a square or sine wave within a frequency range of 200 Hz to 300 KHz. The bipolar output low noise temperature controller section can supply up to 8 W.

SDL Model SDL-2482-P1, $450.00, 38 Available
Spectra Diode Labs GaAlAs 808 nm laser diode, 1 W CW output power, has monitor photodiode, internal TEC, and 10 K ohm thermistor. Each diode includes a mount and mating connector.

SDL Model SDL-930, $3000.00
50 Amp Laser Diode Driver. CW operation or QCW operation using internal pulse generator or external modulation and triggering inputs.

SpectraDiode Labs SDL-TC-40D, $3500.00
Precision Laser Driver Current Source and Temperature Controller.

Tektronix TOP160, $750.00
Dual portable laser source for system loss measurements, troubleshooting, fault location, etc. 1310 nm and 1550 nm center frequencies. -7 dBm (200 uW) output. CW or internal modulation. Two AA batteries for 50+ hours of use. Has Universal connector interface (UCI) and includes a screw-on FC-PC adapter (ST, SC, DIN, HMS-10/HP (2.5 mm) adapters are available from Tektronix). Stability: 0.05 dB (1 hour), 0.15 dB (24 hours).

Thor Labs S1LC1550, $400.00
Fiber coupled laser source, 1550 nm, Power output adjustable up to 1.5 mW. LC connector.

Sumitomo Electric Industries (SEI), SLT2116-CN/VX1, $30.00, 64 Available
SLT2110-xN Series. Transmitter Optical Sub-assembly, 1.3um MQW-FP laser diode module for fiber-optic communication systems, InGaAs monitor photo diode, single mode fiber-stub, and a split sleeve for an SC optical connector. LD IfL=150mA, LD VrL=2V. ExceLight Communications, Inc. Same spec's as SLT2110-CN-VXI except for pin function/position.

Wave Optics, $200.00, 4 Available
Laser source, 1310 nm, 1mW minimum output. Includes power supply.

Unknown Maker and Model, $200.00, Additional Photos: #1, #2
Two laser diodes with collimating optics in pan/tilt mount. Beam diameter is about 6mm. Lasers are 770 and 790nm and can be switched on and off independently. Requires 12 VDC. Mounting post is not included.

Maker & Model Unknow, Red Diode Laser, $5.00
Red diode laser with collimating lens. 676 nm.

 
TOP EMAIL


YAG LASERS

American Control Engineering 40268-4, $1500.00, 2 Available
Pockels cell pulser with American Control Engineering Model 40259-5 power supply, interconnecting cables. and pockels trigger module. The crystal is about 8 x 8 x 24 mm. Requires 115V, 60 Hz and forced air cooling.

Big Sky Laser Technologies, $2000.00, Additional Photos: #1, #2
Er:YAG (Erbium:Yttrium Aluminum Garnet) laser, 2.94 micron wavelength, 800 mJ output energy at 10 Hz, 500 mJ output energy at 5-20 Hz. Has red He-Ne aiming laser. Requires suitable flexible delivery fiber (not included). The original power supply is included. Schematics, Hook-up, and Operating Instructions are not available. Laser requires water cooling.

IntraAction ML-80B, $900.00, 2 Available
Water cooled mode locker with IntraAction MLE-06A frequency synthesizer. The ML-80B is mounted on a 4 axis stage. Because of the way the controller  was mounted one of the decorative side panels was removed and is no longer available.

LaserSonics 0016-5703-91, $90.00, 6 Available
Bare fiber for Nd:Yag laser, SMA connector. 1000 um core with with ball end . Overall length about 120". Unused. In sealed packages. Not sterile. Not for medical use.

LaserSonics 0016-8320, $90.00
Bare fiber for Nd:Yag laser, 600 um core with SMA connector. Overall length about 120". Model B36D. Unused. Not sterile, Not for medical use.

Litton Airtron Unknown Model No., $750.00, 2 Available
Yag laser resonator. Has 2 photodetectors mounted on top. The first is a "lamp on" detector the function of the second is unknown. High voltage connectors with a short length of high voltage cable that terminates in a Cannon plug are included.

NEC P2014, 6 Available, $175.00
Xe (Xenon) Flash Lamp, New

Premier Laser Systems YL0025, $2500.00
Power module for dental/surgical laser system. Requires 230 VAC, 24 A, 1 phase, 50 / 60 Hz. This power module is not compatible with the YL0005 resonator module listed above.

Maker and Model Unknown, $10.00
Lot of three flashlamps. Two different types. O.A.L. ranges from about 5 to 5.5". Diameter ranges from 0.2 to 0.25". They appear to be used. Condition is unknown.

 
TOP EMAIL


CO2 LASERS

Directed Energy IN-2, $200.00
CO2 laser gas insufflator.

Directed Energy P400-PC, $1100.00 2 Available
RF power source with cooler for Directed Energy CO2 lasers. 115 VAC input. In heavy duty reusable shipping container.

Directed Energy PC-2, $200.00
RF power source with meter for Directed Energy CO2 laser.

Laakmann RF-100-40, $385.00
RF power source for Laakmann CO2 lasers, 28 VDC input, unused.

Laakmann Electro Optical, Model TBD, $950.00
40 W Maximum, sealed CO2, tunable, includes Laakmann RF power source with integrated DC power supply, and dither controller. Needs recharge. Sold as-is. Requires 115V single phase power. (02)

Laser Photonics CL150 WTVO, $1850.00
25 W Maximum, sealed waveguide CO2 laser with power supply/controller. (02)

Lumonics ED50, $3000.00
CO2 laser scanner with 4 GSI galvo scanners, collimator, aiming laser, and flat field output lenses.

Pfizer Laser Systems Model Unknown, $700.00, 2 Available
CO2 Laser Head, 30 W maximum output, 1.4 joules max. at 20 Hz, 14 joules max. at 2 Hz. Untested, probably requires recharging.

Pfizer Laser Systems 20C, $1250.00
RF power source, with chiller.

Pfizer Laser Systems 20CH, $1400.00

Premier Laser Systems, , $140.00, 2 Available
Water and air controller for Premier Laser Systems Dental Lasers.

Unknown Maker Unknown Model, $200.00
Collimator assembly with germanium lenses.

Unknown Maker Unknown Model, $200.00
Focusing assembly with germanium lens.

 
TOP EMAIL


HELIUM-NEON LASERS

Control Laser Model 310, $100.00
HeNe laser head w/ built in power supply. Internal Photo

Laser Drive 103-24, $40.00, 2 Available
HeNe power supply. Output 1300 VDC @ 3.5 mA. Terminal lugs on high voltage lines. Requires 10 - 16 VDC @ 0.8 mA.

Laser Drive 314SLFBRH2, $70.00
HeNe power supply. Alden connector. Requires 115/230 VAC.

Mfgr Unknown, Laser Holder, $50.00
For 1.75" dia. laser tubes.

Mfgr Unknown, Laser Holder, $35.00, 3 Available
For 1.75" dia. laser tubes.

PMS Electro-Optics LHRR-0100 / LPS-115, $275.00
Red HeNe laser with benchtop power supply. Random polarization, 1.6 mW measured output, safety rating 5.0 mW. 14" long x 1.75" dia., with Alden connector on 6' cable. Power supply includes key switch, with key, and interlock plug. Setup for 115 VAC operation.

Toshiba or NEC 1 mw, $70.00, 60 Available
1 mW red HeNe laser / optical assembly. Includes laser with 12" high voltage leads, 10 mm beamsplitter cube, 2 adjustable first surface mirrors, electrically focusable lens, laser scanner dual galvo assembly with 2 additional mirrors, small defraction grating and an NEC photo detector. The galvonometers can be driven by a small two channel audio amplifier. A laser power supply is not included.

Uniphase 121T-1700-4.9-TTL-2, $60.00, 2 Available
High voltage power supply, output 1700 VDC @ 4.9 mA, Input 20-28 VDC. Has Alden connector on 6" cable.

Uniphase 180T-2700-5-TTL-4, $70.00
HeNe laser power supply. Input 10-14 VDC, output 2700 VDC @ 5.0 mA. Alden connector on 12" cable.

Uniphase 1101, $60.00
Red HeNe laser, 632.8 nm. Measured output 1.2 mW, Safety rating 4 mW maximum. 9.5 x 1.25" diameter. With Alden connector on 36" cable.

Uniphase 1125, $90.00
Red HeNe laser, Safety rated at 10 mW, measured output 3.5 mW. Requires 2300 VDC @ 6 ma. Diameter: 1.74", length: 15.7". Has Alden connector on 6' cable.

Uniphase 1201-1, $175.00
Benchtop HeNe laser power supply. 1700 VDC @ 4.9 mA output. Input 115 VAC. Alden connector. Includes interlock plug and key for power switch.

Uniphase 314S-2700-5-6-4, $100.00
HeNe laser power supply. Output is 2700 Volts DC @ 5.0-6.0 ma. Alden connector on 12" cable. Input 115/230 Volts AC. Hook-up instructions. NEW.

 
TOP EMAIL


ARGON LASERS

Lexel 65, $350.00
Blue Green Head only - No power supply. Serial No: 1736H. (02)

 
TOP EMAIL


MISCELLANEOUS LASERS

Anritsu MG9586A, $2500.00
Wavelength reference light source. For sale to U.S. end users only.

Cambridge Research LPC-VIS, $2500.00
Cambridge Research & Instrumentation Laser Power Controller. Liquid crystal modulator for 425 to 780 nm lasers from 0.5 mW up to 4 W. Includes controller, optics module, and interconnect cables. 4 mm clear aperture, long term stability 0.05%, 4 digit display of laser output power, 85% transmittance, adjusts laser beam power over about a 40:1 range. Other optics modules allow operation up to 1700 nm and 15 W.

Hughes 62368-50, $400.00
Laser assembly, wavelength unknown, Included test data sheets show 788 mJ output with 16 J input (1264 V) and 1091 mJ output with 22.5 J input (1500 V). The diameter of the rod is about 5 mm and it is about 106 mm long. The rod appears to be emerald green in color when looking down the bore. The O.A.L. of the assembly is about 114 mm and the three wires are each about 350 mm long. This assembly is unused.

Richard Losch Inc. 205-757 Rev 2, $150.00, 10 Available
“OPTO POWER” fiber optic cable, LOSCH CuTIP SMA CONNECTOR x Copper HP 4mm, 1000um, .22na, 2.5m long, PVC jacketed.

Newport F-IRC1, $20.00
Infrared sensor card. 50-50mm active area. 750-1350nm wavelength range. Some burn marks and sensor area is covered by tape.

Oriel 15900, $150.00
Oriel visible beam expander with Oriel 15940 5x 16mm F.L. diverging input lens. High transmittance from 400 to 2000 nm. With AR coating optimized for 400 - 700 nm.

Photonetics 3645 HE 15, $1000.00
Nano-Tunics laser head with control cable.

Photonetics 3646 HE 15, $1000.00
Tunics-OM tunable laser module.

RCA LE2186, $200.00
HeCd Power Supply / Exciter, 0 - 3 KV, SN: R59-17

Maker and Model Unknown, $5.00, 3 Available
Damage Test Slide. I" x 3" in case. Unused.

 
TOP EMAIL


FIBER OPTICS

Agilent 81000FC, $60.00
Connector adapter/interface for optical heads. For FC, PC, and SPC.

Agilent 81000FI, $70.00
Connector interface/

AMP 502144-2, $40.00, 5 Available
AMP Optimate cable. 3 M, 2.5 mm bayonet connectors, 62.5/125 Micron LDS. Unused.

AT&T 1048B, $350.00, 2 Available
CSL LightSpice System Tool Kit. Compatible with all single mode or multimode 250 um coated or 900 um buffered fibers. Average splice loss less than 0.20 dB. Average reflectance (return loss) of less than -50 dB. All tools needed to assemble a CSL Lightsplice except the cleaver are included in a fitted hardshell case (keys are included). Consumables are not included. These kits are New.

Anritsu MN9601A, $350.00
Optical 1:12 channel selector for 1.3 / 1.55 um fiber. Insertion loss <= 2.5 dB, cross talk <= -65 dB, switching uniformity <= 0.03 dB, < 1 second switching time. PC type optical connectors.

Cooke TP-125MK-III, $4500.00, 2 Available
Automatic Fiber Cleaner. Cleans a single fiber end in lest than 3 seconds without static build-up or damage to the fiber. Included 115 VAC to 100 VAC converter.

DiCon D-1X6/1X2-62-ST-B-MC-601, $500.00
Multi-Channel Fiber Optic Switch. Front panel manual control or computer control via GP-IB or RS-232.

Ericsson FSU-995-FA, $5500.00
Fusion splicer. With Siecor FBC-006 high precision fiber cutter, Ericsson 42ST072 power supply , and FSU-995-FA User's Manual.

E-Tek Dynamics FPCR-1B, $2200.00
Fiber optic polarization controller driver. The controller, operating under GP-IB, RS-232, or Front Panel control, provides control voltages to the four liquid crystal retarders cascaded in the FPCR module (which is not included). By applying different combinations of the four control voltages, any desired State Of Polarization can be obtained at the fiber output of the FPCR module from an arbitrary state of polarization input light. The control resolution is 14 bits. An auto-tracking function provides feedback used to maintain the polarization state of the FPCR module. The FPCR-1B can also scan the control voltages automatically to exercise the output polarization state to a random and any possible state on the Poincare sphere for the measurement of the fiber optic devices' PDL (Polarization Dependence Loss). The FPCR221144133 module is specified for operation at 1550 nm +/- 30 nm, grade A (23.1 polarization extinction ratio and 0.98 fiber to fiber insertion loss). The FPCR module was originally shipped in 2001 and comes with the manufacturers testing data. A manual for the FPCR-1B is included on CD-ROM. IEEE-488 and RS-232 interfaces as well as analog control signal inputs. The controller requires 100-240 VAC 50/60Hz power.

E-Tek Dynamics FPCR-1B / FPCR-221144133 $3500.00
Fiber optic polarization controller driver and new and still boxed Polarization Controller Liquid Crystal Module (Etek No: FPCR221144133). The controller, operating under GP-IB, RS-232, or Front Panel control, provides control voltages to the four liquid crystal retarders, cascaded in the FPCR module. By applying different combinations of the four control voltages, any desired State Of Polarization can be obtained at the fiber output of the FPCR module from an arbitrary state of polarization input light. The control resolution is 14 bits. An auto-tracking function provides feedback used to maintain the polarization state of the FPCR module. The FPCR-1B can also scan the control voltages automatically to exercise the output polarization state to a random and any possible state on the Poincare sphere for the measurement of the fiber optic devices' PDL (Polarization Dependence Loss). The FPCR221144133 module is specified for operation at 1550 nm +/- 30 nm, grade A (23.1 polarization extinction ratio and 0.98 fiber to fiber insertion loss). The FPCR module was originally shipped in 2001 and comes with the manufacturers testing data. A manual for the FPCR-1B is included on CD-ROM. IEEE-488 and RS-232 interfaces as well as analog control signal inputs. The controller requires 100-240 VAC 50/60Hz power.

EXFO IQ-203, $2200.00, 2 Available
Optical Test System. Three slot OTS mainframe for EXFO test modules such as 1, 2, or 4 channel power meters, ASE broadband sources, WDM laser sources, tunable laser sources, PDL/OL meter, polarization controllers, optical spectrum analyzers, wavelength meters, PMD analyzer, EDFA, OTDR, and optical switches. Up to four IQ-206 expansion units (each with 6 additional test modules) can be controlled by the IQ-203. The IQ-203 can be operated as a stand alone controller, a controller/computer in a system with multiple GP-IB instruments and no other computer, a GP-IB instrument in a system with a PC controller, a network device, or a computer controlling other RS-232 devices. The EXFO IQ-203 IBM-PC based architecture with Windows 98 embedded OS has a Pentium processor, color LCD display, 10 GB hard disk drive, floppy disk drive, and mouse, keyboard, serial, and VGA ports. The external VGA port will support a 1024 x 768 monitor. An Operation Manual is included. A discount is available if three plug-ins, from those available below, are purchased at the same time as this mainframe. Plug-ins shown in photo are not included.

EXFO IQ-206, $1400.00, 2 Available
Optical Test System Expansion Unit. Six slot OTS expansion chassis for EXFO test modules such as 1, 2, and 4 channel power meters, ASE broadband sources, WDM laser sources, tunable laser sources, PDL/OL meter, polarization controllers, optical spectrum analyzers, wavelength meters, PMD analyzer, EDFA, OTDR, and optical switches. Up to four IQ-206 expansion units (with 24 additional test modules) can be controlled by a single  EXFO IQ-203 controller or your PC with a PC-206 expansion card (a PC-206 card is not included). An Operation Manual is included as is the cable that connects the IQ-206 with an IQ-203 controller. A discount is available if five plug-ins, from those available below, are purchased at the same time as this expansion mainframe. Plug-ins shown in photo are not included.

Fujitsu FujitsuHA15L-0001-C031 #6, $400.00
Mux/Demux Blue 4 FC. Input channels, Output channels. New.

Hewlett Packard HP 11891A, $2000.00, 2 Available
Three port lightwave directional coupler for use with HP 8702B and 8703A Lightwave Component Analyzers. Coupling factor 3 dB. For 50 / 125 um fiber. Includes OPT 014 - three HP 81000VI ST connector interfaces.

JDS 5500L, $250.00
Variable Attenuator, calibrated at 1300 nm. Direct readout, 0 to 50 dB.

JDS/Fitel SC24B5-C2SU, $1200.00
Fiber Optic Switch.

JDS/Fitel SC0124-Z000357, $1200.00
Fiber Optic Switch.

JDS/Fitel SC04B5-C2FA, $1000.00
Fiber Optic Switch.

JDS/Fitel SCO104-Z000345, $1000.00
Fiber Optic Switch.

JDS Uniphase 10070015, $200.00, 3 Available
JDSU Fiber Bragg grating. Insertion loss at 1565.86 nm = 0.27 dB. New, never opened. With test data sheet. Data Sheet SN: 01-23-3880, Data Sheet SN: 01-23-3905

JDSU SW102+227DUFPL1.5, $100.00
Switch module.

New Focus 9127, $5.00
Adapter.

Newport 561-FCA, $120.00, 12 Available
Connectorized fiber holder with rotation for FC connectors. New.

Newport FPH-CA3, $80.00, 5 Available
Chuck for connectorized fiber. SMA Connector. New.

Newport FPH-CA4, $80.00, 9 Available
Chuck for connectorized fiber. FC Connector. New.

Newport FPH-DJ, $35.00
Delrin-jawed chuck for large fibers from 300 microns to 1 mm diameter.

Newport FPH-J, $35.00, 2 Available
Teflon-lined fiber chuck for fibers smaller than 250 microns.

Newport FPH-S, $25.00, 6 Available
Fiber chuck for 80 to 200 micron fibers. New.

Newport F-CPL-L22351-A, $150.00
Benchtop coupler with ST connectors. 10/90, 1310/1550 50 nm.

Newport F-CPL-L22351-P, $150.00
Benchtop coupler with ST connectors. 10/90, 1310/1550 50 nm.

Newport Orion-FX3, $11250.00
Semi-automatic fiber alignment system for industrial and R&D applications such as fiber-to-fiber splices, device-to-fiber coupling optimization of lasers, laser diodes and LEDs into a single-mode fiber, fiber-to-device pigtailing of single-mode fibers to laser diodes and photodetectors, and free space laser beam to fiber alignment. Operates under computer control through it's built-in IEEE-488 (GPIB) interface or as a stand alone instrument. Alignment requires a minimum initial power of less than 100 nW and is initiated at the touch of a button. Once initiated alignment is achieved in less than one second and then maintained by a closed optical servo loop which continuously corrects for mechanical and thermal changes and epoxy curing stresses. Comes with the ORION System Control Module, 818-IS-1 Integrating Sphere with FC,ST, and SC fiber adapters for measurements from 400 to 1600 nm, Newport 562-XYZ three axis translation stage, three AD100 electrostrictive actuators, and manual. Can also be sold as an Orion-FX2 system with two AD-100 actuators and a micrometer for $500.00 less.

OZ Optics, ER-100-3A-IR / ER-100-IR, $2750.00
Polarization Extinction Ratio Meter. FC/APC connector. Wavelength range 850 to 1650 nm. Extinction ratio 30dB from 850 to 1290 nm, 35 dB from 1290 to 1650 nm. 47 dB dynamic range. ER accuracy 1 dB, ER resolution 0.01 dB, angular accuracy 0.5, angular resolution 0.3. Input range 50 uW to 1 mW. FC/APC connector. Built-in RS-232 interface. The alternate number " ER-100-IR " is the same meter witout the " 3A " option (the angled FC/PC adapter).

Photodyne 1975XQ, $1200.00, 3 Available
Programmable attenuator. Front panel pushbutton switch or GPIB programmable from 0 to -80 dB @ 820 nm, 0 to -72 dB @ 1300 nm. Analog output. A copy of the Operation / Programming manual is included. (02x2)

Rifocs 1020, $20.00
Adapter. NTT/FC-PC. New.

Rifocs (see description for part numbers), SOLD
Rack mount system, including: Model 671R super controller, 675RE-D3 3 mm InGaAs optical power meters. 688RL 1300/1550 nm return loss meter, and CP-1308 (675RE for remote head - No Head Included) InGaAs Power Meter. A manual is included for each of the plug-ins.

Rifocs 1020, $20.00
Adapter. NTT/FC-PC. New.

Rifocs 700R, $300.00
System controller.

Rifocs 761R, $800.00
FP laser source, 1310 nm.

Rifocs 771R, $400.00
InGaAs power meter.

Rifocs 771R-REM, $250.00
OPM for remote head. Head not included.

Rifocs 79-0700-23, $250.00
Full 19" width rack mount chassis.

Siecor FCUPC/STUPC, $12.00, 3 Available
Siecor Ultra PC patch cable. 1 M. New.

ThorLabs PA430, $2000.00
Polarimeter. Includes head, data interface box, and interface box to computer cable.

Manufacturer Unknown Clamp, $50.00
Pneumatic Fiber Clamp

 
TOP EMAIL


PHOTONICS-OPTICAL  :  LASERS  :  OPTICAL BREADBOARD  :  INTERFEROMETER  :  MOTION CONTROL  :  MICROSCOPES & LAMPS  :  LAB & PROCESS CONTROL  :  MICROWAVE-RF  :  TEST EQUIPMENT  :  TOOLS & HARDWARE  :  GLUE  :  COMPUTER  :  VIDEO EQUIPMENT  :  ELECTRONIC COMPONENTS  :  WELDERS & WIRE BONDERS  :  PLC  :  EQUIPMENT WANTED  :  SALES  :  HOME  :  E-MAIL