Hewlett Packard HP 55280A, $3200.00
Optics kit for use with HP and Agilent 5528A laser measurement and 5529A calibration systems. This kit is used to measure linear displacement (distance) and includes:
   1 HP 10766A Linear Interferometer,
   2 HP 10767A Linear Retroreflectors,
   3 HP 10785A Height Adjusters with Posts,
   2 HP 10784A bases,
   1 HP 10786A padded case,
   1 HP Lot of miscellaneous mounting hardware and targets.

Hewlett Packard HP 5528A OPTICS KIT #1, $8300.00
Optics kit for use with HP and Agilent 5528A laser measurement and 5529A calibration systems. This kit is used to measure linear displacement (distance), angular, velocity, and flatness and includes:
   1 HP 10759A Foot Spacer Set (3 Precision Baseplates),
   1 HP 10766A Linear Interferometer,
   2 HP 10767A Retroreflector,
   1 HP 10770A Angular Interferometer,
   1 HP 10771A Angular Reflector,
   2 HP 10773A Flatness Mirror,
   2 HP 10784A Base for Optics Height Adjuster with Post,
   2 HP 10785A Height Adjuster w/ Posts plus 1 additional post,
   1 HP 10786A Fitted Case,
   1 HP Lot of miscellaneous mounting hardware and targets.

Hewlett Packard HP 5528A OPTICS KIT #2, $8100.00
Optics kit for use with HP and Agilent 5528A laser measurement and 5529A calibration systems. This kit is used to measure squareness and short range straightness (4" to 120"). For straightness measurements up to 30 meters a 10775A Long Range Straightness Optics kit (which is not included in this offering) is required. The kit includes:
   1 HP 10772A Turning Mirror,
   1 HP 10772-67001 Turning Mirror Mount w/ Bolt & Spacer,
   1 HP 10774A Short Range (4 to 120") Straightness Interferometer w/, Straightness Reflector,
   1 HP 10776A Straightness Accessory Kit w/ 10776-67001 Retroreflector, 10776-67002 Mount, 3 posts, and base,
   1 HP 10777A Optical Square w/ 10777-67002 Mount Assembly,
   1 HP 10787A Fitted Case,
   1 HP Lot of miscellaneous mounting hardware and targets.

Hewlett Packard HP 10690A, $3500.00
   1 HP 10690-60001 Straightness Interferometer Assembly (Cal. 1.01) with mounting plate,
   1 HP 10690-60002 Straightness Reflector (Cal. 1.01). Serial numbers (1332A00059) match.
   1 HP Unknown Model Mounting Plate, 2" x 3",
   1 HP Unknown Model Tip/tilt stage with micrometer drives,
   1 HP 10579-60001 Straightens Adapter with mount.

Hewlett Packard HP 5500C, $700.00
HeNe Laser head.

Hewlett Packard HP 5517A, $900.00, 1 Available
HeNe laser head. For VME and PC systems.

Hewlett Packard HP 5517A, $90.00, 1 Available
HeNe laser head. Complete but not working.

Hewlett Packard HP 5517B, $950.00, 1 Available
HeNe laser head. For VME, PC and 5527A systems. SN:3606A05818/FEB96

Hewlett Packard HP 5517B, SOLD
HeNe laser head. For VME, PC, 5501A, and 5527A systems. NOS, unused in original box.

Hewlett Packard HP 5517C OPT H07, $2150.00, 1 Available
HeNe laser head. For VME, PC, 5501A, and 5527A systems. 6 mm beam diameter, 700 mm/sec. Minimum beam output power is 400 mW (Option H07).

Hewlett Packard HP 5517D, $2100.00, 2 Available
HeNe laser head.

Hewlett Packard HP 5519A, $3200.00
HeNe laser head with built in receiver. Part of the HP / Agilent 5529A / 55292A dynamic calibration system. Velocity 700 mm/sec, Ref frequency 2.4 - 3.0 MHz, Power requirements 100 to 120 VAC or 220 to 240 VAC, 48 to 66 Hz.

Agilent E1709A, $400.00
Remote high performance receiver with option 010. Includes fiber optic cable.

Hewlett Packard HP 10780A, $230.00, 7 Available
Receiver.

Hewlett Packard HP 10780B, $300.00, 3 Available
Receiver.

Hewlett Packard HP 10780C, $450.00, 3 Available
Receiver. New.

Hewlett Packard HP 10780C, $300.00, 14 Available
Receiver.

Hewlett Packard HP 10780F, $400.00, 4 Available
Remote receiver. Includes fiber optic cable.

Hewlett Packard HP 10780F, $400.00, 4 Available
Remote receiver with option C02 (Body only). A fiber optic cable is included.

Hewlett Packard HP 10780F, $450.00
Remote receiver with option C13. Includes fiber optic cable.

Hewlett Packard HP 10780F, $550.00
Remote receiver with all standard accessories. New.

Helios 35-3972, $150.00, 2 Available
External Power Amplifier. Originally part of an HP 5517B interferometer system.

Helios 35-5777, $300.00
Laser Splitter and three modified HP 10880A Cables. These items were removed from a machine in which the cables were plugged into three 10889B PC Servo-Axis Boards. The 30" cables were modified by removing the BNC type receiver connector from an HP 10880A cable and attaching a 4 contact LEMO connector identical to the one that plugs into a 10889B axis board.

Hewlett Packard HP 5021-1502, $50.00
Prototype board. New.

Hewlett Packard HP 5060-8339, $10.00
Connector kit. New.

Hewlett Packard HP 5505A, $1400.00
Laser display unit for HP 5526A laser measurement system.

Hewlett Packard HP 5507A, $1300.00, 3 Available (2-25-192008)
Laser position transducer electronics, with HP 10932-60001 axis board, Micropolis Laser Power Amp PCB, Laser servo PCB, and GPIB. No side panels.

Hewlett Packard HP 5507B, $1600.00, 2 Available (2-25-192008)
Laser position transducer electronics, with HP 10932-60002 axis board, Micropolis Laser Power Amp PCB, Laser servo PCB, and GPIB. No side panels.

Hewlett Packard HP 5508A, $2400.00, 2 Available
Measurement display. Part of 5528A Laser Measurement System. Provides measurement, calculation, display, and output for single axis measurement. Automatically calculates velocity, angular rotation, and straightness displacement when appropriate optics and measurement modes are selected.

Hewlett Packard HP 10563A, $300.00
Material temperature sensor.

Hewlett Packard HP 10564A, $300.00
Air sensor.

Hewlett Packard HP 10579-60004, $250.00
36 x resolution box.

Hewlett Packard HP 10745-60001, $160.00
GPIB Interface for HP5501A Laser Transducer System.

Hewlett Packard HP 10746-60001, $250.00
Binary interface for HP 5501A laser transducer system, with Operating and Service manual, Unused.

Hewlett Packard HP 10751A, $550.00
Air temperature and pressure sensor. Contributes to better measurement accuracy by compensating, in conjunction with the measurement electronics, for variations in air temperature and pressure.

Hewlett Packard HP 10757A, $400.00, 2 Available
Material temperature sensor. Contributes to better measurement accuracy by compensating, in conjunction with the measurement electronics, for variations in the temperature of the workpiece.

Hewlett Packard HP 10757E, $800.00, 2 Available
Material temperature sensor. Contributes to better measurement accuracy by compensating, in conjunction with the measurement electronics, for variations in the temperature of the workpiece. 15 M cable.

Hewlett Packard HP 10762-60001, $100.00
Comparator PCB.

HP 10781A, SOLD
Pulse converter.

Hewlett Packard HP 10885A, $1200.00
PC Axis board.

Hewlett Packard HP 10889B, $1600.00, 2 Available
PC Servo axis board.

Hewlett Packard HP 10895A, $1300.00, 3 Available
VME - Laser Axis board.

Hewlett Packard - Agilent HP 10897B, SOLD
Laser Axis Board. VME.

Hewlett Packard - Agilent HP 10898A, $2400.00, 3 Available
Dual Laser Axis Board. VME.

Hewlett Packard HP 10932-60001, $900.00
Axis PCB.

Hewlett Packard HP ET18706-60011, $50.00
PCB.

Hewlett Packard HP ET20162-60001, $50.00
PCB.

Hewlett Packard HP ET20192-6001, $50.00
PCB.

Hewlett Packard HP ET20192-6002, $50.00
PCB.

Hewlett Packard HP ET20192-6003, $50.00
PCB.

Teletrac 610-100, $600.00, 4 Available
Digital servo controller PCB, Rev B.

Zygo ZMI 1000A, $800.00
Zygo ZMI 1000A Measurement board part no. 8020-0100-07. With Operation Manual on CD-ROM. For use with Zygo ZMI 7702 laser head.

Computer Products CL40-7610I, $200.00
Power Supply - Equal to HP 10884A.

Hewlett Packard HP 10745-60002, $50.00
Cable. Bus Input/Output.

Hewlett Packard HP 10778A, $50.00
Cable.

Hewlett Packard HP 10778-60001, $50.00, 2 Available
Power Cable.

Hewlett Packard HP 10779-60001, $50.00, 6 Available
Reference cable assembly, 5 meter. (10779A).

Hewlett Packard HP 10790A, $180.00
Cable.

Hewlett Packard HP 10791A, SOLD
Power supply reference cable. New.

Hewlett Packard HP 10880A, $90.00
Receiver to axis board cable. 5 meters.

Hewlett Packard HP 10880A(x), $60.00, 4 Available
Receiver to axis board cable. 1 meter.

Hewlett Packard HP 10881A, $180.00
Cable, laser head (5517B and others) to power supply and axis board.

Hewlett Packard HP 10881A/LND-X-152, $360.00
Cable, laser head (5517B and others) to power supply and axis board. Includes Lambda LND-X-152 dual output power supply. Power supply requires 105-127 or 210 to 250 VAC, 57 - 63 Hz.

Hewlett Packard HP 10881D, $220.00, 2 Available
Laser Head Cable (10881 -60204). New.

Hewlett Packard HP 10881-91019, $180.00
Cable. New.

Hewlett Packard / Agilent 10883-60202, $180.00
Agilent 5529A Dynamic Calibration System cable. Connects laser head, axis board, and power supply. New.

Hewlett Packard 10884A, SOLD
Power supply for HP 5517B and other laser heads.

Lambda LND-X-152, $150.00
Power supply for 5517B and other laser heads. Output ±15 VDC @ 2.5 A (40ºC) or 2.1 A (50ºC) Requires 105-127 or 210 to 250 VAC, 47-63 Hz (Output must be derated 10% for 47-53 Hz operation).

Hewlett Packard HP 10753B, SOLD
Laser tripod.

Hewlett Packard HP 10897-90006, SOLD
Operating and Service manual for the HP 10897B High Resolution VMEbus Laser Axis Board, in a generic 3-ring binder. Printed 5/95.

Davidson Optronics D-600, $1000.00
Comparison Autocollimator.

Davidson Optronics D-614-101, $2200.00
Penta Block penta prism. Accuracy 90º +0.8 seconds (Davidson standard cal is 2.0 seconds), Aperture Height 1", Aperture Width 1-7/8", Overall Dimensions 2" x 4" x 4", Height to Aperture Center 1.1", Surface Quality 80/50 per MIL-O-13830, Prism BK-7 PH4 Glass. In wood storage box. Arbor is not included.

Davidson Optronics D-614-104, $3400.00
Penta Block penta prism. Accuracy 90º +0.4 seconds (Davidson standard cal is 3.0 seconds), Aperture Height 1-3/4", Aperture Width 1-7/8", Overall Dimensions 2.6" x 3.87" x 3.87", Height to Aperture Center 1.47", Surface Quality 80/50 per MIL-O-13830, Prism BK-7 PH4 Glass. In wood storage box. Arbor is included.

Davidson Optronics D-633-40, $7500.00
Polygon, 40 faces. In wooden case with accessories and calibration data.

Davidson Optronics D665-109, $140.00
Eyepiece from Model D665-109 Automatic Autocollimator.

Davidson Optronics D-800, $3200.00
Automatic Autocollimator, 1/100 arc sec, with base. Operating manual included. Photo of head rotated 90 degrees. Control unit not included.

Hilger-Watts T.P. 103, $550.00
Penta-prism, openings are 1 3/8 x 1 5/8. Deviation is 90 Deg. 0 Min., 0 Sec. No nicks or scratches on glass but mirror surfaces need refinishing. Includes a wooden box and a mounting post.

Hilger Watts A142/12, $700.00
Autocollimator, 2 axis, missing eyepiece.

Kern DKM2, $850.00 Additional Photos: #1, #2, #3, #4, #5, #6
Wild designed double circle theodolite with optical micrometer. The horizontal and vertical circles are glass, and read directly to single seconds. An auxiliary eyepiece alongside the telescope allows the user to read either circle without moving away from the station. Very nice condition.

Kern DKM2 (SN: 95243), $200.00 Additional Photo #1
DKM2 theodolite serial number: 95234, sold for parts. Photos show areas where parts are missing. Theodolite seems complete except for these areas though accessories are missing.

Kern DKM2 (SN: 67384), $200.00 Additional Photo #1
DKM2 theodolite serial number: 67384, sold for parts. Photos show areas where parts are missing. Theodolite seems complete except for these areas though accessories are missing.

Kern DKM3 xx, $350.00
Striding level for Kern DKM3-A

Keuffel & Esser, 712302, $75.00

Keuffel & Esser 712629, $600.00
Detector target for 71-2615 K&E Laser System.

Keuffel & Esser 714320, $250.00
Alignment telescope stand. For 2.250" barrels.

Keuffel & Esser, , $90.00

Keuffel & Esser, $600.00
Alignment telescope, missing eyepiece. Additional Photos #1, #2, #3, #4, #5

MicroRadian 1D74599-1 $200.00, 2 Available
Autocollimator.

Newport PA-50R, $400.00
Pinhole autocollimator with reference reflector. 5 sec. resolution, FOV 3 deg. Power supply not included.

Nikon Photoelectric Autocollimator 2, $600.00
Control unit only. When used with the Nikon Autocollimator 2 dark-field telescope can provide readings of 0.1 second of arc resolution. Measurement accuracy from 0.5 second of arc within a 1 minute range to 2.0 seconds of arc within a 20 minute range, repeatability of +/- 0.2 second of arc. Controller provides BCD outputs as well as an analog chart recorder output. Has built in memory function, smoothing function to reduce fluctuations, and audible signal to indicate when the target reticule is within range of the CCD sensor. (02)

Northrup Model Unknown, $400.00
Wedge set No. 1. Two pieces, 45 deg. (2.73 w x 2.39 d w x 3.09 h) and 60 deg (2.76 w x 2.33 d w x 3.52 h). Each wedge has two mirrored surfaces. In fitted wooden box.

Northrup Model Unknown, $700.00
Wedge set No. 2. Six pieces, 7.5, 15.0, 22.5, 30.0, 37.5, and 45.0 deg. Sizes range from 1.00 w x 1.58 d w x 4.03 h to 1.00 w x 4.04 d w x 4.26 h). Each wedge has one mirrored surface. In fitted wooden box. All are in very good condition except the 15.0 deg. wedge which is probably useable but has a large chip on one corner and is badly scratched near the base (see photos) and the 30 deg. wedge which has a 1 x 2 mm inclusion on the face.

On-Trak OT0301, $500.00, 3 Available
Precision position sensing amplifier. For 2 axis position sensing photodiodes.

On-Trak PSM2-10Q, $200.00
Position sensing photodiode. Packaged Quadrant Dual Axis PSD. 10mm diameter.

Rank-Tayor-Hobson, Ltd. TU66, $450.00
Cast iron base for alignment telescope or other tools. The base is 10 x 20 x 2" and the steel post is 1.25 x 16". 2 revolutions of the height adjustment nut will move the platform up or down 1".

United Detector Technology UDT 1020 / UDT 431, $3200.00
Graseby Optronics Electronic 0.1 Arc-Sec Autocollimator Model 1020 with UDT 431 optical X-Y position indicator, 1359-1 calibration wedge, and autocollimator to position indicator cable. A copy of the Model 431 Optical Position Monitor manual is included. This 1020 autocollimator is available with a UDT 531 position indicator instead of the 431 for $1350.00 more.