Asymtek A102, $3500.00
Automatic fluid dispensing system, gantry configuration, 20 in/sec, 0.001" resolution, 18" x 18" work area. Additional photos: Rear, Bottom, Left Controls, Right Controls. Includes and EFD 1000XL fluid dispenser and a steel baseplate (approx. size 1/2 x 34 x 35") for mounting your tooling. Shipped by motor freight.

Asymtek A-402, $3500.00, Rear View
Automatic fluid dispensing system, benchtop configuration, 20 in/sec, 0.001" resolution, 12" x 12" work area, can store 10 separate dispensing programs can be stored in onboard memory. Has 8 opto-isolated inputs plus 8 open-collector outputs. Fluidmove dispensing software is available from Asymtek.

Asymtek A-402 Gantry, $4000.00
Automatic fluid dispensing system, gantry configuration, 20 in/sec, 0.001" resolution, 12" x 12" work area, can store 10 separate dispensing programs can be stored in onboard memory. Has 8 opto-isolated inputs plus 8 open-collector outputs. Fluidmove dispensing software is available from Asymtek.

EFD 5109S-B, $10.00, 24 Available
Box of 50 3CC black neoprene pistons.

EFD 5115 OVAL-B 15GP, $10.00, 12 Available
Box of 50 oval tips.

EFD 5123-B, $10.00, 2 Available
Box of 50 orange tips.

EFD 5125-B 325GP, $10.00, 26 Available
Box of 50 0.O10 x 0.5 red tips.

EFD 900, $250.00
Fluid dispenser. Includes, power cord, foot switch, and a copy of the operating guide.

EFD 1000D, $275.00, 2 Available
Fluid dispenser. Includes, power cord, foot switch, and a copy of the operating guide.

EFD 1000XL, $325.00
Fluid / glue dispenser. Includes power cord.

EFD 1500XL, SOLD
Fluid / glue dispenser, works with all fluids including thick pastes, 0 - 100 PSI output, micro-processor time control, 0.001 to 99.9 seconds. Can complete more that 600 dispensing cycles / minute. Requires 100/120/220 VAC and 80 to 100 PSI air. Includes power cord and a copy of the Operating Guide.

EFD 1500XL (mod), $425.00
Fluid / glue dispenser, works with all fluids including thick pastes, 0 - 100 PSI output, micro-processor time control, 0.001 to 99.9 seconds. Can complete more that 600 dispensing cycles / minute. Requires 100/120/220 VAC and 80 to 100 PSI air. Includes power cord, and a copy of the Operating Guide. Modified input fitting.

EFD 2000XL, SOLD
Microprocessor based fluid dispenser. Stores 5 deposit settings in memory. Dispense times from 0.001 to 99.99 seconds are programmable from the front panel or by using the "Teach" function which allows settings to be stored in memory once an acceptable deposit has been made. Digital readout of pressure and vacuum in PSI or bar. Vacuum pullback allows very low viscosity fluids to be dispensed without dripping between cycles. The dispense cycle can be initiated and monitored remotely. Includes power cord, and a copy of the Operating Guide. Requires 80 to 100 PSI shop air, 100/120/220 VAC 50/60 Hz, 6 VA.

EFD Start-up Kit $25.00, 7 Available
Selection of 150 plus tips, pistons, caps, etc. in plastic storage box.

EFD ST124, $10.00, 30 Available
Box of 50 soft bevel tips.

Fishman LDS9000/D060001, $650.00
Intelligent Dispensing System - Fluid dispenser. Uses positive displacement pump handpiece eliminating the need for an air compressor, air lines, and regulator. Uses 3, 5, 10 or 30 cc syringes. Maximum output volume from 3 to 30 cc, minimum output volume 0.00023 to 0.00129 cc, dispense rates from 0.006 to 0.771 cc/sec (depending on syringe size). Programmable vacuum pull-back for low viscosity fluids. Microprocessor holds 10 dispensing programs. Current dispensing parameters are displayed on LCD display while dispensing. Compatible with all viscosity materials. Includes controller, power cord, and an assortment of tips. Does not include barrels, barrel clamps, handpiece, or foot pedal.

Fishman LDS9000/D060001 (SDAV), SOLD
Intelligent Dispensing System - Fluid dispenser. Uses positive displacement pump handpiece eliminating the need for an air compressor, air lines, and regulator. Uses 3, 5, 10, or 30 cc syringes. Maximum output volume from 3 to 30 cc, minimum output volume 0.00023 to 0.00129 cc, dispense rates from 0.006 to 0.771 cc/sec (depending on syringe size). Programmable vacuum pull-back for low viscosity fluids. Microprocessor holds 10 dispensing programs. Current dispensing parameters are displayed on LCD display while dispensing. Compatible with all viscosity materials. Includes controller, SDAV handpiece, foot pedal, power cord, and an assortment of tips. Does not include barrels or barrel clamps.

Fishman PD9000, $600.00, 2 Available
PD-9000 / D050001 Fluid dispenser. Uses positive displacement pump handpiece eliminating the need for an air compressor, air lines, and regulator. Uses 3, 5, 10, or 30 cc syringes. Maximum output volume up to 30 cc, minimum output volume as low as 0.001 cc. Dispense rates from 0.02 to 3.08 cc/sec. Programmable vacuum pull-back for low viscosity fluids. Microprocessor holds 5 dispensing programs. Current dispensing parameters are displayed on LCD display while dispensing. Compatible with all viscosity materials. Includes controller, power cord, and an assortment of tips. Does not include barrels, handpiece, foot pedal, or barrel clamps.

Glenmarc PV-2000, $300.00
Glue dispenser.

Kahnetics KDS803, $7.00, 2 Available
Syringe Adapter (Head Only) for 2 1/2 and 3 cc syringes. Metal clamp. Works with all manufacturers Luer Lok, Luer Slip, or tapered syringes. The adapter has a 360° swivel for ease of motion. Unused. (The photo shows a larger KDS805 adapter not the KDS803).

Kahnetics KDS805, $7.00, 8 Available
Syringe Adapter (Head Only) for 5 and 6 cc syringes. Metal clamp. Works with all manufacturers Luer Lok, Luer Slip, or tapered syringes. The adapter has a 360° swivel for ease of motion. Unused.

Kahnetics KDS805-6, $10.00, 3 Available
Syringe Adapter Assembly for 5 and 6 cc syringes. Metal clamp with 6 foot hose and male fitting. Works with all manufacturers Luer Lok, Luer Slip, or tapered syringes. The adapter has a 360° swivel for ease of motion. Unused. (The photo shows a larger KDS830-6 assembly not the KDS805-6).

Dymax Corporation 3010EC, $1400.00, 2 Available
Long life pre-focused 100 W UV/Visible spot light source for curing UV adhesives, uses Dymax number 36064 bulb, the reflector of the installed bulb is damaged and should be replaced for maximum output. Has foot switch input for remote operation, a digital hour meter used for tracking lamp life that reads in 1/10 hour increments, and a manual or timed shutter that has 7 operating ranges from 0 to 0.1 seconds to 0 to 999, requires 90 - 260V, 50 - 60 Hz, 10A. Includes manual, safety goggles, and foot switch. A light guide is not included.

Dymax PC-2,$1100.00
400 W Dymax PC-2 Ultra-Violet Light-Welder moderate intensity (20–45 milliwatts/cm2) flood curing light source operating at UV wavelengths between 300 and 500 nm with a 228 x 228 mm curing area. Includes lamp/reflector housing, separate power supply with hour meter and new UVEX Ultraspec 2000 SCT® UV safety glasses. 120 VAC, 60 Hz.

Dymax PC-2 with Shutter, $1600.00
400 W Dymax PC-2 Ultra-Violet Light-Welder moderate intensity (20–45 milliwatts/cm2) flood curing light source operating at UV wavelengths between 300 and 500 nm with a 228 x 228 mm curing area. Air powered shutter operates manually or in timed mode with exposure times from 1 to 99 seconds. Includes lamp/reflector housing, separate power supply with hour meter, foot switch, shutter, and new UVEX Ultraspec 2000 SCT® UV safety glasses. 120 VAC, 60 Hz.

Dymax Engineering Adhesives PC-3, SOLD
50 W UV spot welder for UV curing adhesives, up to 1/2" spot size, uses Dymax number 35033 bulb, requires 120V 60 Hz 1A. The bulb and foot switch are included, the light guide is not included.

Dymax Engineering Adhesives PC-3D, SOLD
50 W UV spot welder for UV curing adhesives, up to 1/2" spot size, has hour meter, manual or timed shutter, uses Dymax number 35003 bulb, requires 120V 60 Hz 1A. The bulb and dual action foot switch are included, the light guide is not included. Built in fluid dispenser with vacuum for low viscosity liquids.

EFOS 100ss PLUS, $850.00
UV Curing light source.

EFOS 300-60651, $100.00, 4 Available
Mercury Lamp. 100 W. For EFOS Ultracure 100SS. These lamps are in open boxes and may have been used. They may be returned within 3 days of delivery if you find that they don't meet you needs. Also marked - OSRAM HBO R 103 W/45.

EFOS EX353, $50.00, 2 Available

EFOS Novacure N2000, $1400.00
Intelligent spot cure system. Allows complete exposure control with adjustable settings for intensity, exposure time, and dose. Has radiometer to ensure repeatability. Also monitors other areas of concern, such as shutter functionality, operating temperature, AC power status, and lamp module power status. The lamp is mounted in a slide-out drawer for ease of replacement. Unit includes lamp, liquid-filled light guide, power cord, a floppy disk with EFOS software, and a user's manual. Excellent condition.

EFOS N2001-A1, $1800.00
Intelligent spot cure system. Allows complete exposure control with adjustable settings for intensity, exposure time, and dose. Has radiometer to ensure repeatability. Also monitors other areas of concern, such as shutter functionality, operating temperature, AC power status, and lamp module power status. The lamp is mounted in a slide-out drawer for ease of replacement. Has a Step-Cure feature that varies exposure time and idle time (dwell time) between exposures. Unit includes lamp with about 3 hours of use, foot switch, liquid-filled 5mm x 750mm light guide model 805-00006, power cord, two filters, a floppy disk with EFOS software, and a user's manual. Excellent condition.

EFOS UltraCure 100, $500.00
UV spot curing system light source, 100W DC mercury vapor lamp, 120V 60 Hz power, light guide is not included.

EFOS Model # Unknown, $325.00
High power fiber light quide for use with Novacure systems. Wavelength range 250 - 700 nm. Throughput over 80%. Overall length 1 M. Input 4 mm. Tip diameter 4 mm. Metal sheath.

EFOS Model # Unknown, $350.00
Liquid filled light guide for use with Novacure systems. Wavelength range 250 - 700 nm. Throughput over 80%. Overall length 2 M. Input 3 mm. Tip diameter 3 mm.

EFOS Model # Unknown, $400.00, 2 Available
Bifurcated liquid light guide for use with Novacure systems. Wavelength range 250 - 700 nm. Throughput over 80%. Overall length 1 M. Two 3 mm diameter inputs. Two 3 mm tips.

EXFO 5D27, $300.00
Bifurcated high power light guide, 5 mm input, 3 mm outputs, 0.37 NA, 160-1200 nm transmission, 1 M. Other numbers that appear on the light guide, ZL-2-03/05-0107 and EXFO 806-00005

Full Spectrum Technologies 2000, $1000.00
Series 2000 UV light source. 100W, intensity control, 115/230 VAC, 50/60 Hz. Includes 1 meter bifurcated liquid light guide and unterminated remote cable for your footswitch or computer interface.

Green Spot GS, SOLD
High intensity ultraviolet light source. The specified UV output is 5000mw(UVA)/sq. cm, 300-480nm wavelength (365nm peak). This unit has a total of just 82 hours of operation (with the original lamp still installed). The specified lamp life of more than 500 hours. This unit may also be controlled directly by a PLC or computer, with one simple 24 VDC I/O line. Includes footswitch, UV safety goggles, 5mm X 1000mm fiber optic light guide, and manual.

Innotech Excalibur Series VI, $2000.00, Photo - Door open, Photo - Control panel
Lens curing system. Part No: 00001000056. Version 6.8.4 firmware. Goes through warm-up period and initialization successfully. After self test the lamp condition indicator shows that the system is "Operational" and the "Chamber Ready" lamp flashes. The timer counts down when the "Cure" button is pressed. Shipping weigh: 85 pounds. Lens molds and manual are not included. (02)

International Light IL1400 / XRL 140B, $900
Photometer model IL1400 with XRL 140B probe and case. IL1440-B photoresist radiometer system. Autoranges with a dynamic Range: 30 nW/cm2 to 250 mW/cm2. Spectral Range: 326 to 401 nm. The IL1440-B employs UV filtering for applications requiring a peak sensitivity in the UVA and subdued response in the blue. The 'B' response is also useful for isolating the 365 mm mercury line.

Ultra Violet Products UVP B-100A, $150.00, 2 Available
UV lamp with filter. 115 VAC, 60 Hz, 2.5A.

Loctite ZETA 7000, $700.00.
UV curing system.

Loctite ZETA 7410, $1200.00
Ultraviolet Curing System.

Osram HBO 103 W/2 100, $150.00, 8 Available
Green Spot UV curing system new replacement UV bulb. Super high pressure mercury short arc lamp, 4.55A, 22V, 100 W. Light output 3100 initial lumens. BT-3-1/2 glass, SFA7.5 base. Can be used as a substitute for HBO 100W/2. These lamps are new in seal boxes.